Filling results include: 

- Fill time

- Injection pressure                                                                      

- Pressure at transfer

- Melt-front temperature

- Bulk temperature

- Weld lines

- Air traps

- Shear rate / Shear stressHolding / Packing results include: 

- Volumetric shrinkage

- Pressures

- Temperatures

- Velocity

- Freeze times

- Accurate clamp force prediction

Cooling results for the cavity:

- Cavity surface temperature distribution

- Distribution of temperature differences across opposite surfaces of the cavity

- Distribution of average plastic temperature at ejection time

- Distribution of maximum plastic temperature at ejection time

- Relative position of the peak temperature at ejection time

- Distribution of frozen layer thickness

- Temperature profile through thickness for each cavity element

Cooling results for the mold: 

- Surface temperature distribution on both sides of inserts and parting planes

- Distribution of temperature difference across insert and joint line surfaces

- Temperature of mold external surfaces and surface of cooling circuits

- Pressure drop along each cooling circuit

- Variation in coolant temperature through each cooling circuit

- Flow rate in each cooling circuit

- Reynolds number in each cooling circuit

Shrinkage and Warpage results include:

-Total deformation

-Deflection in the X-, Y-, and Z-directions

-Deflection history at any node

-Deflected component shape with exaggeration factor

-Buckling mode shape

-Elemental parallel and perpendicular shrinkage

-Elemental principal residual stress

-Elemental Mises-Hencky stresses

-Elemental maximum shear stress .